|
Post by cmartise on Sept 10, 2013 21:21:00 GMT -6
My mistake he has 4.44 gears
|
|
|
Post by banis325 on Sept 11, 2013 7:57:30 GMT -6
Thanks but I went and spent the little extra to get one shipped, I had a couple local people fall through and I needed one like 2 weeks ago lol.
|
|
|
Post by banis325 on Sept 12, 2013 19:46:22 GMT -6
Well diff wont be here till tuesday so it will probably go in Wednesday morning/afternoon.
If anyone would like to lend a hand I could probably use it. Might be a little tricky trying to control a jack and move the diff around and such. Let me know if you would be interested in helping.
If not I could probably get it by myself.
|
|
|
Post by cmartise on Sept 12, 2013 19:52:50 GMT -6
Make sure you have the right size punch to drive out the axle roll pins. It took me several hours to knock the ones out of my front axles. I ended up drilling them out. That will end up being your biggest head ache.
|
|
|
Post by banis325 on Sept 12, 2013 22:32:53 GMT -6
The rear axles have a little c clip inside the diff that hold on to the axles. A little pop with a pry bar and it should come right out. But who knows what kind of little problems ill come across lol
|
|
|
Post by cmartise on Sept 12, 2013 23:02:36 GMT -6
Well good to know the rears are easier to remove than the fronts. Hopefully you don't experience any big issues then.
|
|
|
Post by banis325 on Sept 17, 2013 23:38:44 GMT -6
Well my diff got here today and I was too antsy to wait till tomorrow to get it done so I dove in head first.
Didn't have any big problems, I did find out how an axle to the head feels though.
If anybody wants me to write up a DIY while its still fresh in my head let me know. It's pretty self explanatory though
|
|
|
Post by Deleted on Sept 18, 2013 8:38:15 GMT -6
Sweet! Glad to hear you got it going AND it was pretty straightforward! Hope the bump on the head didn't knock too much info out of there. LOL! Do a write up if you want to honestly. Just keep in mind, what is "self explanatory" to you may be way over someone else's head. If that is the case, they probably shouldn't tackle this themselves anyway! LOL! Congrats dude!
|
|