|
Post by thumbbreaker on May 2, 2014 20:29:30 GMT -6
Was looking for STI stencil for my intercooler.
|
|
mulder
Junior Member
Posts: 95
|
Post by mulder on May 5, 2014 5:23:54 GMT -6
|
|
|
Post by xti on May 5, 2014 9:10:46 GMT -6
Thanks, mulder. I was curious where to find one too.
|
|
|
Post by thumbbreaker on May 5, 2014 15:06:01 GMT -6
Thnx.
|
|
|
Post by xti on May 13, 2014 9:14:23 GMT -6
Mulder, did you take the IC off to paint it or just paint it on the car, with everything else covered?
|
|
mulder
Junior Member
Posts: 95
|
Post by mulder on May 13, 2014 10:15:32 GMT -6
i haven't re-painted my IC yet but i had to trim the outside of the stencil so it would fit properly on top of the IC. it was cut kinda big when i got it in the mail
I plan on taking mine off because i don't want to cover and tape everything around the IC and under the hood to avoid over spray. it's easy to take off
I'm thinking of applying a UV black light clear coat over the STI logo. I'm doing some research to see if a clear coat will have any effect with heat dissipation issues on the fins.
|
|
|
Post by thumbbreaker on May 13, 2014 10:46:47 GMT -6
Brilliant!
|
|
clbd39
Junior Member
Posts: 79
|
Post by clbd39 on May 14, 2014 13:45:25 GMT -6
My wife could probably make one pretty easy...
I painted my WRX one with it on the car, not too bad, just put some newspaper all around
Wish I would've of painted the outside of my STi IC :\ paint to keep up
|
|